We offer wide range of Laminar Air Flow Systems.
Salient Features:
Made out of best quality Board & stainless steel grade IS 304 & all exterior surfaces covered with laminated mica sheet or steel sheet. Work table made of mica top/Stain finish SS Table Top, complite with HEPA filter & pre filters motor blower, static pressure manometer, cock for gas, air or vacuum lines. Front and side doors are made of plexiglass transparent thick sheet duly framed. Built-in U.V. Tube work table is illuminated by flurescent light. Two legs table top and two table supports are detachable can be taken out and fixed within minutes, front door can be kept full open & half open/ fully closed as desired. The equipment is fitted with safety attachments of international standards.
| Model | LT - 95 |
| Particle retention | 0.3 micron and above |
| Noise level | 75 decibel |
| HEPA Filter media | Ultra clean glass fiber paper
retention 0.3 micron |
| Prefilter Media | Synthenic non-woven polyster fiber
retention 5 micron |
| Blower motor | 1400 rpm app. ( DIDW ) |
| Power | 220V 50 Hz |
| Working Chamber | 2'x2'x2' | 3'x2'x2' | 4'x2'x2' | 6'x2'x2' |
| Size of HEPA filter | 2'x2'x6" | 3'x2'x6" | 4'x2'x6" | 3'x2'x6" |
| No. of HEPA filter | 1 | 1 | 1 | 2 |
| No. of Pre filters | 1 | 1 | 1 | 2 |
| Illumination | 1x20W | 1x20W | 1x20W | 2x20W |
| U.V.Germicidal light | 1x1 1/2ft | 1x1 1/2ft | 1x3ft | 2x3ft |
